Graphic Design home

How To Make 3d Paper Snowflakes7 min read

Jul 19, 2022 5 min

How To Make 3d Paper Snowflakes7 min read

Reading Time: 5 minutes

Winter is right around the corner, and with it comes the chilly weather and the snowflakes. If you’re looking for a fun and festive way to decorate your home for the season, why not try making some 3D paper snowflakes? Not only are they beautiful, but they’re also easy to make!

To make a 3D paper snowflake, you’ll need:

– Paper (preferably a heavy weight paper, like cardstock)

– Scissors

– Ruler

– Pencil

1. Cut a square piece of paper measuring 6 inches on each side.

2. Fold the square in half, then in half again.

3. Cut the square in half both ways to create four equal-sized triangles.

4. Take one of the triangles and fold it in half, then in half again.

5. Cut the triangle in half both ways to create two equal-sized triangles.

6. Cut off the pointed end of one of the triangles.

7. Place the ruler at the bottom of the triangle, and make a small mark at the halfway point.

8. Draw a line from the mark to the top of the triangle.

9. Cut along the line.

10. Unfold the triangle and you’ll have a six-pointed snowflake.

Repeat the steps above to make as many snowflakes as you like!

How do you make a 3d snowflake template?

Making a 3D snowflake template is a very easy process that can be done with a few common materials. You will need a piece of paper, scissors, a ruler, and a pencil. First, draw a simple snowflake design on the paper. Next, using the scissors, cut out the snowflake. Finally, use the ruler to measure and mark the center of the snowflake. Now you can use the template to create beautiful 3D snowflakes!

How do you hang a 3d paper snowflake?

There’s something about snowflakes that just feels so festive. Maybe it’s the way they hang in the air, looking like tiny pieces of winter magic. If you want to add a touch of magic to your holiday decor, you can make your own 3D paper snowflakes. Not only are they beautiful, but they’re also really easy to make!

Here’s how to make your own 3D paper snowflake:

1. Cut a square out of paper. The square should be at least 6 inches wide.

2. Fold the square in half diagonally.

3. Fold the square in half again, this time horizontally.

4. Cut along the folded lines, making sure to cut through all the layers of paper.

5. Open up the folded paper to reveal your snowflake.

6. Hang your snowflake with a piece of tape or a thumbtack.

That’s all there is to it! Your 3D paper snowflake is ready to hang and enjoy.

How do you make a paper snowflake step by step?

Making a paper snowflake is a fun, easy winter activity that can be enjoyed by people of all ages. All you need to make a paper snowflake is some paper, a pair of scissors, and a little bit of creativity!

To make a paper snowflake, start by folding a piece of paper into quarters. Then, cut along the crease to make six equal-sized strips. Next, fold each strip in half, and then cut along the fold to create twelve equally-sized strips. Finally, take each strip and curl it into a snowflake shape.

There are many different ways to curl the strips into snowflake shapes. One way is to hold the strip at one end and twist it around your finger. Another way is to hold the strip at one end and fold it in half. Then, use your scissors to cut small slits in the folded end of the strip. Curl the strip into a snowflake shape and hold it in place with a drop of glue.

Once your snowflakes are finished, hang them in a window or on a door to add a touch of winter to your home. Enjoy!

How do you make big paper snowflakes?

Making big paper snowflakes is a fun, easy way to decorate for the winter season. All you need is some paper, a pair of scissors, and some creativity!

To make a big paper snowflake, start by folding a piece of paper in half. Then, fold it in half again. Cut along the folded lines to create four triangular pieces of paper. unfold the paper and you should have a snowflake shape.

Next, take one of the triangular pieces of paper and fold it in half. Cut along the folded line to create two more triangular pieces of paper. unfold the paper and you should have six triangular pieces of paper.

Take one of the triangular pieces of paper and fold it in half again. Cut along the folded line to create four more triangular pieces of paper. unfold the paper and you should have twelve triangular pieces of paper.

Now, take one of the triangular pieces of paper and fold it in half again. Cut along the folded line to create eight more triangular pieces of paper. unfold the paper and you should have twenty-four triangular pieces of paper.

Finally, take one of the triangular pieces of paper and fold it in half again. Cut along the folded line to create sixteen more triangular pieces of paper. unfold the paper and you should have thirty-six triangular pieces of paper.

Now, it’s time to put the snowflake together. Start by taking six of the triangular pieces of paper and arranging them into a star shape. Then, take another six triangular pieces of paper and arrange them around the outside of the star. Finally, take the last six triangular pieces of paper and attach them to the center of the star.

Your big paper snowflake is now ready to hang on the wall or ceiling!

How do you make a big 3d snowflake?

Christmas is just around the corner, and what better way to get into the festive spirit than by making your own big 3D snowflake? It’s easy to do, and the results are simply stunning.

To make a big 3D snowflake, you’ll need:

– A piece of paper

– A ruler

– A pencil

– A pair of scissors

– A glue stick

– A bowl of water

1. Draw a six-pointed star on your piece of paper, using a ruler to make sure the lines are straight.

2. Cut out the star with scissors.

3. Fold the star in half, then in half again.

4. Glue the edges of the star together to form a snowflake shape.

5. Dip the snowflake in water, then shake off the excess.

6. Hang the snowflake to dry.

Your big 3D snowflake is now ready to hang on your Christmas tree!

How do you make concertina snowflakes?

Snowflakes are a beautiful sight to see, but they can also be a lot of fun to make. If you’re looking for a new way to make snowflakes, try making concertina snowflakes.

Concertina snowflakes are made by cutting a piece of paper into a long, thin strip. Then, you fold the strip in half and cut it into strips. You can keep folding the strips in half and cutting them until you have a lot of small pieces.

To make a snowflake, you need a piece of string or a wire. Twist the string or wire around the small pieces of paper, and then tie it off. You can also use a needle to poke a hole in the top of the snowflake and attach a string or wire.

You can hang your snowflakes from the ceiling or hang them from a tree outside. They look especially beautiful when it’s snowing!

How do you make a giant 3d snowflake?

Making a giant 3D snowflake is a fun activity for the winter season. It is easy to do and only requires a few materials. You will need a piece of paper, scissors, a ruler, a pencil, and some white glue.

First, fold the paper in half diagonally. Then, cut out a triangle from the folded edge. Unfold the paper and you will have a large triangle.

Measure the length of the triangle from the point to the bottom. Then, divide that number in half. Measure that distance from the point on the triangle and draw a line. This will be the center of your snowflake.

Draw six more lines extending from the center line. They should be evenly spaced and equally as long as the center line. Connect the lines at the points to create the snowflake shape.

Using a ruler, draw a small line in the center of the snowflake. This will be the point where the snowflake is attached to the string.

Glue the snowflake to a piece of cardboard or a Styrofoam plate for stability. Let it dry completely.

To hang your snowflake, tie a piece of string or yarn to the point in the center and hang it from the ceiling.

Jim Miller is an experienced graphic designer and writer who has been designing professionally since 2000. He has been writing for us since its inception in 2017, and his work has helped us become one of the most popular design resources on the web. When he's not working on new design projects, Jim enjoys spending time with his wife and kids.